Added support for a few more Dalvik instructions.

git-svn-id: svn://svn.gna.org/svn/chrysalide/trunk@160 abbe820e-26c8-41b2-8c08-b7b2b41f8b0a

12 files changed, 966 insertions, 42 deletions

diff --git a/src/arch/dalvik/Makefile.am b/src/arch/dalvik/Makefile.am
index 855d287..c8c0145 100644
--- a/src/arch/dalvik/Makefile.am
+++ b/src/arch/dalvik/Makefile.am
@@ -3,9 +3,14 @@ noinst_LTLIBRARIES = libarchdalvik.la
 
 libarchdalvik_la_SOURCES =				\
 	instruction.h instruction.c			\
+	op_add.c							\
 	op_const.c							\
+	op_iget.c							\
 	op_invoke.c							\
+	op_iput.c							\
+	op_move.c							\
 	op_mul.c							\
+	op_new.c							\
 	op_nop.c							\
 	op_ret.c							\
 	op_sget.c							\
diff --git a/src/arch/dalvik/instruction.c b/src/arch/dalvik/instruction.c
index 8bd4894..f485cec 100644
--- a/src/arch/dalvik/instruction.c
+++ b/src/arch/dalvik/instruction.c
@@ -68,36 +68,59 @@ typedef struct _dalvik_instruction
 
 static dalvik_instruction _instructions[DOP_COUNT] = {
 
-    [DOP_NOP]               = { 0x00, "nop" },
+    [DOP_NOP]                   = { 0x00, "nop" },
 
-    [DOP_CONST_4]           = { 0x12, "const/4" },
-    [DOP_CONST_16]          = { 0x13, "const/16" },
+    [DOP_MOVE_RESULT_OBJECT]    = { 0x0c, "move-result-object" },
 
+    [DOP_CONST_4]               = { 0x12, "const/4" },
+    [DOP_CONST_16]              = { 0x13, "const/16" },
 
-    [DOP_CONST_HIGH16]      = { 0x15, "const/high16" },
 
-    [DOP_CONST_STRING]      = { 0x1a, "const-string" },
+    [DOP_CONST_HIGH16]          = { 0x15, "const/high16" },
 
+    [DOP_CONST_STRING]          = { 0x1a, "const-string" },
 
-    [DOP_RETURN_VOID]       = { 0x0e, "return-void" },
-    [DOP_RETURN]            = { 0x0f, "return" },
 
+    [DOP_RETURN_VOID]           = { 0x0e, "return-void" },
+    [DOP_RETURN]                = { 0x0f, "return" },
 
-    [DOP_SGET]              = { 0x60, "sget" },
-    [DOP_SGET_WIDE]         = { 0x61, "sget-wide" },
-    [DOP_SGET_OBJECT]       = { 0x62, "sget-object" },
 
+    [DOP_NEW_INSTANCE]          = { 0x22, "new-instance" },
 
 
-    [DOP_INVOKE_VIRTUAL]    = { 0x6e, "invoke-virtual" },
-    [DOP_INVOKE_SUPER]      = { 0x6f, "invoke-static" },
-    [DOP_INVOKE_DIRECT]     = { 0x70, "invoke-direct" },
-    [DOP_INVOKE_STATIC]     = { 0x71, "invoke-static" },
-    [DOP_INVOKE_INTERFACE]  = { 0x72, "invoke-interface" },
+    [DOP_IGET]                  = { 0x52, "iget" },
+    [DOP_IGET_WIDE]             = { 0x53, "iget-wide" },
+    [DOP_IGET_OBJECT]           = { 0x54, "iget-object" },
+    [DOP_IGET_BOOLEAN]          = { 0x55, "iget-boolean" },
+    [DOP_IGET_BYTE]             = { 0x56, "iget-byte" },
+    [DOP_IGET_CHAR]             = { 0x57, "iget-char" },
+    [DOP_IGET_SHORT]            = { 0x58, "iget-short" },
+    [DOP_IPUT]                  = { 0x59, "iput" },
+    [DOP_IPUT_WIDE]             = { 0x5a, "iput-wide" },
+    [DOP_IPUT_OBJECT]           = { 0x5b, "iput-object" },
+    [DOP_IPUT_BOOLEAN]          = { 0x5c, "iput-boolean" },
+    [DOP_IPUT_BYTE]             = { 0x5d, "iput-byte" },
+    [DOP_IPUT_CHAR]             = { 0x5e, "iput-char" },
+    [DOP_IPUT_SHORT]            = { 0x5f, "iput-short" },
+    [DOP_SGET]                  = { 0x60, "sget" },
+    [DOP_SGET_WIDE]             = { 0x61, "sget-wide" },
+    [DOP_SGET_OBJECT]           = { 0x62, "sget-object" },
 
 
 
-    [DOP_MUL_INT_2ADDR]     = { 0xb2, "mul-int/2addr" }
+    [DOP_INVOKE_VIRTUAL]        = { 0x6e, "invoke-virtual" },
+    [DOP_INVOKE_SUPER]          = { 0x6f, "invoke-static" },
+    [DOP_INVOKE_DIRECT]         = { 0x70, "invoke-direct" },
+    [DOP_INVOKE_STATIC]         = { 0x71, "invoke-static" },
+    [DOP_INVOKE_INTERFACE]      = { 0x72, "invoke-interface" },
+
+
+
+    [DOP_MUL_INT_2ADDR]         = { 0xb2, "mul-int/2addr" },
+
+
+
+    [DOP_ADD_INT_LIT8]          = { 0xd8, "add-int/lit8" }
 
 
 };
diff --git a/src/arch/dalvik/instruction.h b/src/arch/dalvik/instruction.h
index 2bd77a3..e5a3e69 100644
--- a/src/arch/dalvik/instruction.h
+++ b/src/arch/dalvik/instruction.h
@@ -29,13 +29,15 @@
 
 
 
-
-
 /* Enumération de tous les opcodes */
 typedef enum _DalvikOpcodes
 {
     DOP_NOP,                                /* nop (0x00)                  */
 
+
+    DOP_MOVE_RESULT_OBJECT,                 /* move-result-object (0x0c)   */
+
+
     DOP_CONST_4,                            /* const/4 (0x12)              */
     DOP_CONST_16,                           /* const/16 (0x13)             */
 
@@ -48,6 +50,23 @@ typedef enum _DalvikOpcodes
     DOP_RETURN,                             /* return (0x0f)               */
 
 
+    DOP_NEW_INSTANCE,                       /* new-instance (0x22)         */
+
+
+    DOP_IGET,                               /* iget (0x52)                 */
+    DOP_IGET_WIDE,                          /* iget-wide (0x53)            */
+    DOP_IGET_OBJECT,                        /* iget-object (0x54)          */
+    DOP_IGET_BOOLEAN,                       /* iget-boolean (0x55)         */
+    DOP_IGET_BYTE,                          /* iget-byte (0x56)            */
+    DOP_IGET_CHAR,                          /* iget-char (0x57)            */
+    DOP_IGET_SHORT,                         /* iget-short (0x58)           */
+    DOP_IPUT,                               /* iput (0x59)                 */
+    DOP_IPUT_WIDE,                          /* iput-wide (0x5a)            */
+    DOP_IPUT_OBJECT,                        /* iput-object (0x5b)          */
+    DOP_IPUT_BOOLEAN,                       /* iput-boolean (0x5c)         */
+    DOP_IPUT_BYTE,                          /* iput-byte (0x5d)            */
+    DOP_IPUT_CHAR,                          /* iput-char (0x5e)            */
+    DOP_IPUT_SHORT,                         /* iput-short (0x5f)           */
     DOP_SGET,                               /* sget (0x60)                 */
     DOP_SGET_WIDE,                          /* sget-wide (0x61)            */
     DOP_SGET_OBJECT,                        /* sget-object (0x62)          */
@@ -61,6 +80,8 @@ typedef enum _DalvikOpcodes
 
     DOP_MUL_INT_2ADDR,                      /* mul-int/2addr (0xb2)        */
 
+    DOP_ADD_INT_LIT8,                       /* add-int/lit8 (0xd8)         */
+
     DOP_COUNT
 
 } DalvikOpcodes;
diff --git a/src/arch/dalvik/op_add.c b/src/arch/dalvik/op_add.c
new file mode 100644
index 0000000..92ba818
--- /dev/null
+++ b/src/arch/dalvik/op_add.c
@@ -0,0 +1,65 @@
+
+/* OpenIDA - Outil d'analyse de fichiers binaires
+ * op_add.c - décodage des opérations d'addition
+ *
+ * Copyright (C) 2010 Cyrille Bagard
+ *
+ *  This file is part of OpenIDA.
+ *
+ *  OpenIDA is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  OpenIDA is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "opcodes.h"
+
+
+#include "instruction.h"
+#include "operand.h"
+
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'add-int/lit8'.               *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_add_int_lit8(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_ADD_INT_LIT8);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22B))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
diff --git a/src/arch/dalvik/op_iget.c b/src/arch/dalvik/op_iget.c
new file mode 100644
index 0000000..e0e1e0f
--- /dev/null
+++ b/src/arch/dalvik/op_iget.c
@@ -0,0 +1,281 @@
+
+/* OpenIDA - Outil d'analyse de fichiers binaires
+ * op_iget.c - décodage des chargements de champs d'instance
+ *
+ * Copyright (C) 2010 Cyrille Bagard
+ *
+ *  This file is part of OpenIDA.
+ *
+ *  OpenIDA is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  OpenIDA is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "opcodes.h"
+
+
+#include "instruction.h"
+#include "operand.h"
+
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget'.                       *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-boolean'.               *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_boolean(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_BOOLEAN);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-byte'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_byte(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_BYTE);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-char'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_char(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_CHAR);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-object'.                *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_object(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_OBJECT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-short'.                 *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_short(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_SHORT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iget-wide'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iget_wide(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IGET_WIDE);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
diff --git a/src/arch/dalvik/op_iput.c b/src/arch/dalvik/op_iput.c
new file mode 100644
index 0000000..e221c3b
--- /dev/null
+++ b/src/arch/dalvik/op_iput.c
@@ -0,0 +1,281 @@
+
+/* OpenIDA - Outil d'analyse de fichiers binaires
+ * op_iput.c - décodage des enregistrements de champs d'instance
+ *
+ * Copyright (C) 2010 Cyrille Bagard
+ *
+ *  This file is part of OpenIDA.
+ *
+ *  OpenIDA is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  OpenIDA is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "opcodes.h"
+
+
+#include "instruction.h"
+#include "operand.h"
+
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput'.                       *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-boolean'.               *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_boolean(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_BOOLEAN);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-byte'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_byte(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_BYTE);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-char'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_char(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_CHAR);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-object'.                *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_object(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_OBJECT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-short'.                 *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_short(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_SHORT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'iput-wide'.                  *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_iput_wide(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_IPUT_WIDE);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_22C | DALVIK_OP_POOL(DPT_FIELD)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
diff --git a/src/arch/dalvik/op_move.c b/src/arch/dalvik/op_move.c
new file mode 100644
index 0000000..eb152a3
--- /dev/null
+++ b/src/arch/dalvik/op_move.c
@@ -0,0 +1,65 @@
+
+/* OpenIDA - Outil d'analyse de fichiers binaires
+ * op_move.c - décodage des opérations de multiplications
+ *
+ * Copyright (C) 2010 Cyrille Bagard
+ *
+ *  This file is part of OpenIDA.
+ *
+ *  OpenIDA is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  OpenIDA is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "opcodes.h"
+
+
+#include "instruction.h"
+#include "operand.h"
+
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'move-result-object'.         *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_move_result_object(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_MOVE_RESULT_OBJECT);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_11X))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
diff --git a/src/arch/dalvik/op_new.c b/src/arch/dalvik/op_new.c
new file mode 100644
index 0000000..709871c
--- /dev/null
+++ b/src/arch/dalvik/op_new.c
@@ -0,0 +1,65 @@
+
+/* OpenIDA - Outil d'analyse de fichiers binaires
+ * op_new.c - décodage des créations de nouvelles instances
+ *
+ * Copyright (C) 2010 Cyrille Bagard
+ *
+ *  This file is part of OpenIDA.
+ *
+ *  OpenIDA is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  OpenIDA is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "opcodes.h"
+
+
+#include "instruction.h"
+#include "operand.h"
+
+
+
+/******************************************************************************
+*                                                                             *
+*  Paramètres  : data = flux de données à analyser.                           *
+*                pos  = position courante dans ce flux. [OUT]                 *
+*                len  = taille totale des données à analyser.                 *
+*                addr = adresse virtuelle de l'instruction.                   *
+*                proc = architecture ciblée par le désassemblage.             *
+*                                                                             *
+*  Description : Décode une instruction de type 'new-instance'.               *
+*                                                                             *
+*  Retour      : Instruction mise en place ou NULL.                           *
+*                                                                             *
+*  Remarques   : -                                                            *
+*                                                                             *
+******************************************************************************/
+
+GArchInstruction *dalvik_read_instr_new_instance(const bin_t *data, off_t *pos, off_t len, vmpa_t addr, const GDalvikProcessor *proc)
+{
+    GArchInstruction *result;               /* Instruction à retourner     */
+    SourceEndian endian;                    /* Boutisme lié au binaire     */
+
+    result = g_dalvik_instruction_new(DOP_NEW_INSTANCE);
+
+    endian = g_arch_processor_get_endianness(G_ARCH_PROCESSOR(proc));
+
+    if (!dalvik_read_operands(result, data, pos, len, endian, DALVIK_OPT_21C | DALVIK_OP_POOL(DPT_TYPE)))
+    {
+        g_object_unref(G_OBJECT(result));
+        return NULL;
+    }
+
+    return result;
+
+}
diff --git a/src/arch/dalvik/opcodes.h b/src/arch/dalvik/opcodes.h
index 3a90d6f..2389270 100644
--- a/src/arch/dalvik/opcodes.h
+++ b/src/arch/dalvik/opcodes.h
@@ -35,8 +35,8 @@ typedef GArchInstruction * (* dalvik_read_instr) (const bin_t *, off_t *, off_t,
 
 
 
-/* Décode une instruction de type 'nop'. */
-GArchInstruction *dalvik_read_instr_nop(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+/* Décode une instruction de type 'add-int/lit8'. */
+GArchInstruction *dalvik_read_instr_add_int_lit8(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
 
 
@@ -63,17 +63,28 @@ GArchInstruction *dalvik_read_instr_const_string(const bin_t *, off_t *, off_t,
 
 
 
+/* Décode une instruction de type 'iget'. */
+GArchInstruction *dalvik_read_instr_iget(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
+/* Décode une instruction de type 'iget-boolean'. */
+GArchInstruction *dalvik_read_instr_iget_boolean(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
+/* Décode une instruction de type 'iget-byte'. */
+GArchInstruction *dalvik_read_instr_iget_byte(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
-/* Décode une instruction de type 'sget'. */
-GArchInstruction *dalvik_read_instr_sget(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+/* Décode une instruction de type 'iget-char'. */
+GArchInstruction *dalvik_read_instr_iget_char(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iget-object'. */
+GArchInstruction *dalvik_read_instr_iget_object(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iget-short'. */
+GArchInstruction *dalvik_read_instr_iget_short(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iget-wide'. */
+GArchInstruction *dalvik_read_instr_iget_wide(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
-/* Décode une instruction de type 'sget-object'. */
-GArchInstruction *dalvik_read_instr_sget_object(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
-/*  Décode une instruction de type 'sget-wide'. */
-GArchInstruction *dalvik_read_instr_sget_wide(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
 
 
@@ -94,10 +105,46 @@ GArchInstruction *dalvik_read_instr_invoke_virtual(const bin_t *, off_t *, off_t
 
 
 
+
+/* Décode une instruction de type 'iput'. */
+GArchInstruction *dalvik_read_instr_iput(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-boolean'. */
+GArchInstruction *dalvik_read_instr_iput_boolean(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-byte'. */
+GArchInstruction *dalvik_read_instr_iput_byte(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-char'. */
+GArchInstruction *dalvik_read_instr_iput_char(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-object'. */
+GArchInstruction *dalvik_read_instr_iput_object(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-short'. */
+GArchInstruction *dalvik_read_instr_iput_short(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'iput-wide'. */
+GArchInstruction *dalvik_read_instr_iput_wide(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+
+
+
+
+/* Décode une instruction de type 'move-result-object'. */
+GArchInstruction *dalvik_read_instr_move_result_object(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+
 /* Décode une instruction de type 'mul-int/2addr'. */
 GArchInstruction *dalvik_read_instr_mul_int_2addr(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
 
 
+/* Décode une instruction de type 'new-instance'. */
+GArchInstruction *dalvik_read_instr_new_instance(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'nop'. */
+GArchInstruction *dalvik_read_instr_nop(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
 
 /* Décode une instruction de type 'return'. */
 GArchInstruction *dalvik_read_instr_return(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
@@ -107,4 +154,25 @@ GArchInstruction *dalvik_read_instr_return_void(const bin_t *, off_t *, off_t, v
 
 
 
+
+
+
+
+/* Décode une instruction de type 'sget'. */
+GArchInstruction *dalvik_read_instr_sget(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/* Décode une instruction de type 'sget-object'. */
+GArchInstruction *dalvik_read_instr_sget_object(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+/*  Décode une instruction de type 'sget-wide'. */
+GArchInstruction *dalvik_read_instr_sget_wide(const bin_t *, off_t *, off_t, vmpa_t, const GDalvikProcessor *);
+
+
+
+
+
+
+
+
+
 #endif  /* _ARCH_DALVIK_OPCODES_H */
diff --git a/src/arch/dalvik/operand.c b/src/arch/dalvik/operand.c
index 7b58b1d..7e8bf43 100644
--- a/src/arch/dalvik/operand.c
+++ b/src/arch/dalvik/operand.c
@@ -180,6 +180,7 @@ typedef enum _DalvikOperandID
     DOI_REGISTER_8,
 
     DOI_IMMEDIATE_4,
+    DOI_IMMEDIATE_8,
     DOI_IMMEDIATE_16,
     DOI_IMMEDIATE_H16,
 
@@ -916,6 +917,24 @@ static bool dalvik_read_basic_operands(GArchInstruction *instr, const bin_t *dat
             };
             break;
 
+        case DALVIK_OPT_22B:
+            types = (DalvikOperandID []) {
+                DOI_REGISTER_8,
+                DOI_REGISTER_8,
+                DOI_IMMEDIATE_8,
+                DOI_INVALID
+            };
+            break;
+
+        case DALVIK_OPT_22C:
+            types = (DalvikOperandID []) {
+                DOI_REGISTER_4,
+                DOI_REGISTER_4,
+                DOI_POOL_CONST,
+                DOI_INVALID
+            };
+            break;
+
         default:
             types = (DalvikOperandID []) {
                 DOI_INVALID
@@ -942,6 +961,10 @@ static bool dalvik_read_basic_operands(GArchInstruction *instr, const bin_t *dat
                 op = _g_imm_operand_new_from_data(MDS_4_BITS, data, pos, len, low, endian);
                 break;
 
+            case DOI_IMMEDIATE_8:
+                op = g_imm_operand_new_from_data(MDS_8_BITS, data, pos, len, endian);
+                break;
+
             case DOI_IMMEDIATE_16:
                 op = g_imm_operand_new_from_data(MDS_16_BITS, data, pos, len, endian);
                 break;
@@ -1124,6 +1147,8 @@ bool dalvik_read_operands(GArchInstruction *instr, const bin_t *data, off_t *pos
         case DALVIK_OPT_21C:
         case DALVIK_OPT_21H:
         case DALVIK_OPT_21S:
+        case DALVIK_OPT_22B:
+        case DALVIK_OPT_22C:
             result = dalvik_read_basic_operands(instr, data, pos, len, &low, endian, model);
             break;
 
diff --git a/src/arch/dalvik/operand.h b/src/arch/dalvik/operand.h
index 4045c5f..fd26e96 100644
--- a/src/arch/dalvik/operand.h
+++ b/src/arch/dalvik/operand.h
@@ -196,6 +196,9 @@ typedef enum _DalvikOperandType
 
     DALVIK_OPT_21S      = DALVIK_OP_LEN(2) | DALVIK_OP_REG(1) | 'S',
 
+    DALVIK_OPT_22B      = DALVIK_OP_LEN(2) | DALVIK_OP_REG(2) | 'B',
+    DALVIK_OPT_22C      = DALVIK_OP_LEN(2) | DALVIK_OP_REG(2) | 'C',
+
 
     DALVIK_OPT_35C      = DALVIK_OP_LEN(3) | DALVIK_OP_REG(5) | 'C'
 
diff --git a/src/arch/dalvik/processor.c b/src/arch/dalvik/processor.c
index 7bf469e..1e54146 100644
--- a/src/arch/dalvik/processor.c
+++ b/src/arch/dalvik/processor.c
@@ -151,37 +151,59 @@ static GArchInstruction *g_dalvik_processor_decode_instruction(const GDalvikProc
 
     static const dalvik_read_instr decodings[DOP_COUNT] = {
 
-        [DOP_NOP]               = dalvik_read_instr_nop,
+        [DOP_NOP]                   = dalvik_read_instr_nop,
 
 
-        [DOP_CONST_4]           = dalvik_read_instr_const_4,
-        [DOP_CONST_16]          = dalvik_read_instr_const_16,
+        [DOP_MOVE_RESULT_OBJECT]    = dalvik_read_instr_move_result_object,
 
 
-        [DOP_CONST_HIGH16]      = dalvik_read_instr_const_high16,
+        [DOP_CONST_4]               = dalvik_read_instr_const_4,
+        [DOP_CONST_16]              = dalvik_read_instr_const_16,
 
 
-        [DOP_CONST_STRING]      = dalvik_read_instr_const_string,
+        [DOP_CONST_HIGH16]          = dalvik_read_instr_const_high16,
 
 
+        [DOP_CONST_STRING]          = dalvik_read_instr_const_string,
 
-        [DOP_RETURN_VOID]       = dalvik_read_instr_return_void,
-        [DOP_RETURN]            = dalvik_read_instr_return,
 
 
-        [DOP_SGET]              = dalvik_read_instr_sget,
-        [DOP_SGET_WIDE]         = dalvik_read_instr_sget_wide,
-        [DOP_SGET_OBJECT]       = dalvik_read_instr_sget_object,
+        [DOP_RETURN_VOID]           = dalvik_read_instr_return_void,
+        [DOP_RETURN]                = dalvik_read_instr_return,
 
+        [DOP_NEW_INSTANCE]          = dalvik_read_instr_new_instance,
 
-        [DOP_INVOKE_VIRTUAL]    = dalvik_read_instr_invoke_virtual,
-        [DOP_INVOKE_SUPER]      = dalvik_read_instr_invoke_super,
-        [DOP_INVOKE_DIRECT]     = dalvik_read_instr_invoke_direct,
-        [DOP_INVOKE_STATIC]     = dalvik_read_instr_invoke_static,
-        [DOP_INVOKE_INTERFACE]  = dalvik_read_instr_invoke_interface,
 
+        [DOP_IGET]                  = dalvik_read_instr_iget,
+        [DOP_IGET_WIDE]             = dalvik_read_instr_iget_wide,
+        [DOP_IGET_OBJECT]           = dalvik_read_instr_iget_object,
+        [DOP_IGET_BOOLEAN]          = dalvik_read_instr_iget_boolean,
+        [DOP_IGET_BYTE]             = dalvik_read_instr_iget_byte,
+        [DOP_IGET_CHAR]             = dalvik_read_instr_iget_char,
+        [DOP_IGET_SHORT]            = dalvik_read_instr_iget_short,
+        [DOP_IPUT]                  = dalvik_read_instr_iput,
+        [DOP_IPUT_WIDE]             = dalvik_read_instr_iput_wide,
+        [DOP_IPUT_OBJECT]           = dalvik_read_instr_iput_object,
+        [DOP_IPUT_BOOLEAN]          = dalvik_read_instr_iput_boolean,
+        [DOP_IPUT_BYTE]             = dalvik_read_instr_iput_byte,
+        [DOP_IPUT_CHAR]             = dalvik_read_instr_iput_char,
+        [DOP_IPUT_SHORT]            = dalvik_read_instr_iput_short,
+        [DOP_SGET]                  = dalvik_read_instr_sget,
+        [DOP_SGET_WIDE]             = dalvik_read_instr_sget_wide,
+        [DOP_SGET_OBJECT]           = dalvik_read_instr_sget_object,
 
-        [DOP_MUL_INT_2ADDR]  = dalvik_read_instr_mul_int_2addr
+
+        [DOP_INVOKE_VIRTUAL]        = dalvik_read_instr_invoke_virtual,
+        [DOP_INVOKE_SUPER]          = dalvik_read_instr_invoke_super,
+        [DOP_INVOKE_DIRECT]         = dalvik_read_instr_invoke_direct,
+        [DOP_INVOKE_STATIC]         = dalvik_read_instr_invoke_static,
+        [DOP_INVOKE_INTERFACE]      = dalvik_read_instr_invoke_interface,
+
+
+        [DOP_MUL_INT_2ADDR]         = dalvik_read_instr_mul_int_2addr,
+
+
+        [DOP_ADD_INT_LIT8]          = dalvik_read_instr_add_int_lit8
 
 
     };